Related Manuals for Jensen JiSS-10i
Summary of Contents for Jensen JiSS-10i
- Page 1 ® DOCKING STEREO SPEAKER FOR iPod AND iPhone USER MANUAL JiSS-10i (iPod/iPhone Not Included) PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
-
Page 2: Dear Jensen® Customer
The serial number of this product is found on its bottom cover. You should note the serial number of this unit in the space provided as a permanent record of your purchase to aid in identification in the event of theft of loss. Model Number: JiSS-10i Serial Number:... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. -
Page 4: Compliance With Fcc Regulations
17. Do not attempt to dismantle, open or repair this product yourself. If a fault occurs, seek advice from your local qualified service technician or contact the distributor via the telephone number at the back of this instruction manual. 18. Caution marking and nameplate are located on bottom of product. IMPORTANT NOTES Avoid installing the unit in locations described below: ... -
Page 5: Protect Your Furniture
'feet' before you place the product on fine wooden furniture. PRODUCT FEATURES The JiSS-10i is an iPod / iPhone Docking Music System with incorporates the following features: Player / Charger for iPhone, iPod nano, iPod touch, iPod classic, and iPod (5th generation) ... -
Page 6: Location Of Controls
LOCATION OF CONTROLS 1. iPod/iPhone Dock 2. Volume/Tuning Down Button 3. Multiple Function Button: A.) POWER ON/OFF Button B.) Play/Pause Button in iPhone/iPod mode C.) Snooze Button for alarm (Only with App) 4. Volume/Tuning Up Button 5. DC INPUT JACK 6. -
Page 7: Installation
INSTALLATION CONNECTING THE AC POWER An AC-DC Adaptor with the output DC5V 2000mA (included) is required for operating the main unit. Plug in the AC-DC Adaptor by: 1.) Firmly and securely inserting the DC plug side of the adaptor into the DC Jack on the back of unit 2.) Plug the Adaptor plug into an outlet rated at 120V AC~ 60Hz. -
Page 8: Auxiliary Input
will not function and you must use your iPod/iPhone Play/Pause control instead. It is recommended to always turn off the unit before docking your iPod/iPhone. Adjust the sound level by pressing the VOLUME UP/DOWN buttons on the top of unit. 5.) The iPod/iPhone charges even during playback. - Page 9 JiSS-10i. To operate the FM scan radio: 1. Make sure no Apple device is docked in the JiSS-10i. 2. Press the Center “Power” button and the blue power LED will light. Static or an FM station will be heard through the speaker.
-
Page 10: Care And Maintenance
From the Apple App Store, search for “Jensen JiSS-10i” and download the Free App to you iPhone or iPod touch. Once installed tap on the “JiSS-10i” icon to launce the App. Please check the App Store regularly for new updates. -
Page 11: Troubleshooting Guide
Search the App Store for Jensen JiSS-10i, on your iPhone/iPod touch download and install the free app. FM no function Tap the “JiSS-10i” app icon to launch the app iPhone/iPod touch App on your iPhone/iPod touch and select not running navigate to the “Radio”... -
Page 12: Specifications
SPECIFICATIONS Power Requirement Main unit AC-DC Adaptor Input: 120 V~ 60HZ Output: 5V 2000mA Frequency Range Radio Band FM 87.5 - 108 MHz, 0.1 MHz tuning step “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod and iPhone, respectively, and has been certified by the developer to meet Apple performance standards. - Page 13 90 DAY LIMITED WARRANTY AND SERVICE VALID IN THE U.S.A ONLY SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the date of original customer purchase and provided the product is utilized within the U.S.A.