uuIndicatorsu
Indicator
Name
Collision
Mitigation
Braking
System
TM
(CMBS
TM
Indicator
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
90
On/Blinking
Comes on for a few seconds when
●
you turn the ignition switch to ON
(
w
*1
, then goes off.
Comes on when you deactivate
●
the CMBS
TM
. A driver information
interface message appears for five
seconds.
Comes on if there is a problem
●
with the CMBS
TM
.
Comes on if the CMBS
●
deactivated temporarily after the
battery has been disconnected,
then re-connected.
)
Comes on when the CMBS
●
*
system shuts itself off.
Explanation
Stays on constantly without the
●
CMBS
TM
off - Have your vehicle checked
by a dealer.
2 Collision Mitigation Braking
System
TM
TM
is
Drive a short distance at more than 12
●
mph (20 km/h). The indicator should go
off. If it does not, have your vehicle
checked by a dealer.
TM
Stays on - The area around the camera is
●
blocked by dirt, mud, etc. Stop your
vehicle in a safe place, and wipe it off with
a soft cloth.
2 Front Sensor Camera
Stays on - The temperature inside the
●
camera is too high. Use the climate control
system to cool down the camera. The
system activates when the temperature
inside the camera cools down.
2 Front Sensor Camera
(CMBS
TM
)
*
P. 453
*
P. 408
*
P. 408
Message
*