Mitsubishi Electric mr.slim MSZ-D30NA Operating Instructions Manual
Split-type air conditioners
Hide thumbs
Also See for mr.slim MSZ-D30NA:
- Service manual (214 pages) ,
- Operating instructions manual (33 pages) ,
- Manual (92 pages)
Related Manuals for Mitsubishi Electric mr.slim MSZ-D30NA
Summary of Contents for Mitsubishi Electric mr.slim MSZ-D30NA
- Page 1 SPLIT-TYPE AIR CONDITIONERS INDOOR UNIT MSZ-D30NA MSZ-D36NA For user OPERATING INSTRUCTIONS English • To use this unit correctly and safely, be sure to read these operating in- structions before use.
- Page 2 ● OPERATING INSTRUCTIONS ● ONTENTS ■ SAFETY PRECAUTIONS ■ NAME OF EACH PART ■ PREPARATION BEFORE OPERATION ■ SELECTING OPERATION MODES ■ FAN SPEED AND AIRFLOW DIRECTION ADJUSTMENT ■ ECONO COOL OPERATION ■ POWERFUL OPERATION ■ TIMER OPERATION (ON/OFF TIMER) ■...
- Page 3 AFETY PRECAUTIONS Do not operate switches with wet hands. CAUTION • This may cause electric shock. Do not clean the air conditioner with water or place an object Do not step on an unstable bench to operate or clean the that contains water, such as a fl...
-
Page 4: Remote Controller
● OPERATING INSTRUCTIONS ● AME OF EACH PART Indoor unit Remote controller Signal transmitting Front panel Air cleaning fi lter section (Anti-Allergy Enzyme Filter) Distance of signal : About 20 ft (6 m) Air fi lter Beep(s) is (are) heard (Catechin air fi... - Page 5 REPARATION BEFORE OPERATION Before operation: Insert the power supply plug into the power outlet and/or turn the breaker on. Installing the remote controller batteries Press RESET Remove the front lid Insert AAA alkaline batteries Install the front lid • Make sure the polarity of the batteries is correct. •...
-
Page 6: Cool Mode
● OPERATING INSTRUCTIONS ● ELECTING OPERATION MODES AUTO mode (Auto change over) The unit selects the operation mode according to the difference between the room temperature and the set temperature. During AUTO mode, the unit changes mode (COOL↔HEAT) when the room temperature is 4°F (2°C) away from the set temperature for more than 15 minutes. - Page 7 AN SPEED AND AIRFLOW DIRECTION ADJUSTMENT Vertical airflow direction (AUTO) The vane is set to the most effi cient airfl ow direction. COOL/DRY:horizontal position. HEAT:downward position. (Manual) For efficient air conditioning, select upper position for COOL/DRY, and lower position for HEAT. During COOL/DRY, when the vane is set to position (4) or (5), the vane automatically moves to position (1) after 0.5 to 1 hour to prevent any condensation from dripping.
-
Page 8: On/Off Timer
● OPERATING INSTRUCTIONS ● CONO COOL OPERATION IMER OPERATION (ON/OFF TIMER) Press during COOL mode Page 5 to start Press during operation to set the timer. ECONO COOL operation. The unit performs swing operation vertically in various cycle according (ON timer) : The unit will turn ON at the set to the temperature of the unit. -
Page 9: Front Panel
LEANING Instructions: • Switch off the power supply or turn off the breaker before cleaning. • Use only diluted mild detergents. • Be careful not to touch the metal parts with your hands. • Do not expose parts to direct sunlight, heat, or fi re to dry. •... - Page 10 ● OPERATING INSTRUCTIONS ● HEN YOU THINK THAT TROUBLE HAS OCCURRED Even if these items are checked, when the unit does not recover from the Symptom Explanation & Check points trouble, stop using the air conditioner and consult your dealer. Remote controller The display on the remote •...
-
Page 11: Installation Place
HEN THE AIR CONDITIONER IS NOT NSTALLATION PLACE AND GOING TO BE USED FOR A LONG TIME ELECTRICAL WORK Installation place Set to the highest temperature in manual COOL mode, Avoid installing the air conditioner in the following places. and operate for 3 to 4 hours. Page 5 •... - Page 12 HEAD OFFICE: TOKYO BLDG., 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN JG79A063H02...