Download
Share
Print this page
  1. Manuals
  2. Brands
  3. VBC Racing Manuals
  4. Automobile
  5. WildFire
  6. Instruction manual

VBC Racing WildFire Instruction Manual

1/10 4wd electric competition touring car kit
Hide thumbs

Advertisement

Quick Links

Download this manual
COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT
E
Thank you for purchasing VBC Racing product.
Things that we should remind you.
This VBC Racing kit is a high performance, racing grade car kit
intended for experienced racers. The kit compose of VBC
formulated composite materials, top quality full carbon fiber
chassis and high grade 7075 material which will give you a
competitive edge over the others.
Novice racer should seek advice from more experienced racer
before assembly.
Always keep this instruction manual handy at all times for quick
reference even after completing the assembly.
Before your assembly, sand the chassis edges.
Sand the chassis edges with #600 sand paper and apply CA
glue to the edges and counter sink holes.
Need help or support.
If you need help or you would like to leave us a comment,
please email to our support team: support@vbc-racing.com or
visit our web site www.vbcracing.com
INSTRUCTIONS MANUAL
5

Advertisement

loading
Need help?

Need help?

Do you have a question about the WildFire and is the answer not in the manual?

Questions and answers

Related Manuals for VBC Racing WildFire

Summary of Contents for VBC Racing WildFire

  • Page 1 Thank you for purchasing VBC Racing product. Things that we should remind you. This VBC Racing kit is a high performance, racing grade car kit intended for experienced racers. The kit compose of VBC formulated composite materials, top quality full carbon fiber chassis and high grade 7075 material which will give you a competitive edge over the others.
  • Page 2 *Not included in this kit A-01-VBC-0035-25 WildFire Standard Graphite Chassis Sand the below graphite edges with #600 sand paper and apply CA glue to the edges. A-01-VBC-0027 WildFire Graphite Front Shock Tower A-01-VBC-0028 WildFire Graphite Rear Shock Tower © VBC Racing WILDFIRE...
  • Page 3 15x0.3 Shim B-02-VBC-0077 x 2 Outdrive Sealer O-Ring 15x0.3 Shim M2x10 Shaft Pin B-02-VBC-0020 x 2 10x15 Ball Bearing Diff Outdrive Diff Shaft Sealer O-Ring B-03-VBC-0006 x 2 Rear Gear Diff Right Side Assembly Cross Section © VBC Racing WILDFIRE...
  • Page 4 Seal Gasket B-03-VBC-0004 x 1 Place Seal Gasket to the left side diff assembly before putting the right side diff together Seal Gasket Diff Gear Shaft A-03-VBC-0020 x 1 Right Side Diff Assembly Belt Tension Adjuster Ring © VBC Racing WILDFIRE...
  • Page 5 Motor Mount Motor Mount Support B-02-VBC-0067 x 1 Center Suspension Mount Shim(1mm) x 2 A-01-VBC-0038 M3x8 Flathead M3x8 Flathead C-02-SC-F0308 x 1 M3x6 Flathead C-02-SC-F0306 x 13 M3x6 Flathead M3x6 Flathead M3x6 Flathead M3x6 Flathead M3x6 Flathead © VBC Racing WILDFIRE...
  • Page 6 Battery Adjust Top Plate x 1 B-02-VBC-0072 M3x8 Flathead 1mm Center Suspension Arm Shim M3x8 Flathead C-02-SC-F0308 x 2 M3x6 Flathead M3x6 Flathead C-02-SC-F0306 x 8 M3x6 Flathead M3x6 Flathead M3x6 Flathead Battery Position Slider A-01-VBC-0033 x 1 © VBC Racing WILDFIRE...
  • Page 7 Turnbuckle Cup A-03-VBC-0039 x 6 Make 2 steering link tie-rods, follow the connector cups directions as the above diagram. The connector cups edge to edge shall be 28.20mm. Please use a caliper to measure the exact measurement © VBC Racing WILDFIRE...
  • Page 8 Install the steering unit onto the main chassis with two M3x6 Flathead Screws. Then attach the left and right tie rods to the steering unit. Front Belt Type SS A-03-VBC-0048-512 x 1 Make sure the front belt is between the two Steering Assembly Poles. © VBC Racing WILDFIRE...
  • Page 9 3x6mm Ball Bearing C-02-BB-0603 x 2 3x5x0.5mm Shim B-02-VBC-0093 x 3 M3x12 Roundhead Screw C-02-SC-R-0312 x 1 M3x4 Roundhead Screw C-02-SC-R0304 x 1 WildFire Standard Upper Deck A-01-VBC-0026-20 M3 Lock Nut C-02-SC-NN03 x 1 M3x4 Roundhead 20T Center Pulley A-03-VBC-0023 x 2...
  • Page 10 Be careful not to overthread the set screw. The set screw should not over the edge of the bottom of Upper Bulkhead. Overtheading may obstruct the drive hub from spinning. Rear Belt Type SS A-03-VBC-0048-177 x 1 © VBC Racing WILDFIRE...
  • Page 11 M3x8 Roundhead C-02-SC-R0308 x 4 M2x10 Roundhead C-02-SC-R2.0x10 x 2 M2x10 Roundhead Tighten screw to lock the Belt Tension Adjuster Ring position Neutral Loosen Tighten Tighten or loosen the belt tension by adjusting the Belt Tension Adjuster Ring dial © VBC Racing WILDFIRE...
  • Page 12 Front Spool Outdrive A-03-VBC-0055 x 2 10x15 Ball Bearing Diff Holder Belt Tension Adjuster Ring A-03-VBC-0047x 2 10x15 Ball Bearing C-02-BB-1510-B x 2 Spool Drive Cup M3x12 Flathead C-02-SC-F0312 x 2 M3x12 Flathead M3x6 Roundhead C-02-SC-R0306 x 3 © VBC Racing WILDFIRE...
  • Page 13 M3x10 Set Screw C-02-SC-SS-0310 x 2 Tighten screw to lock the Belt Tension Adjuster Ring position Neutral Loosen Tighten M2x10 Roundhead Tighten or loosen the belt tension by adjusting the Belt Tension Adjuster Ring dial M2x10 Roundhead © VBC Racing WILDFIRE...

  • Page 14: Rear Suspension Arm Assembly

    1mm Suspension Shim A-01-VBC-0037 x 1 M3x6 Flat Head Screw C-02-SC-F0306 x 2 After installing the rear arms, make sure the arms can move freely E30 Suspension Mount M3x6 Flat Head M3x6 Flat Head 1mm Suspension Shim © VBC Racing WILDFIRE...
  • Page 15 0 Offset Hex Wheel Hub B-02-VBC-0051 x 2 Ball Connetor B-02-VBC-0045 x 2 M2x10 Shaft Pin M1.6x4 Screw 0 Offset Hex Wheel Hub Do not over tighten the M1.6x4 screw to prevent stripping T1 7075 Spacer B-02-VBC-0019-10 x 2 © VBC Racing WILDFIRE...
  • Page 16 M3x6 Set Screw C-02-SC-SS-0306 x 2 3x5x0.5mm Shim M3x6 Set Screw 3x5x0.5mm Shim M3x23 Upright Pin M3x6 Set Screw Tighten the set screw. Screw should be flat to the arm bottom and do not over tighten. M3x23 Upright Pin © VBC Racing WILDFIRE...
  • Page 17 Ball Connector Suspension Arm Spacer T2 Suspension Arm Spacer T1 M3x10 Set Screw Suspension Arm Spacer T2 Grease Arm Pin Pivot Ball Suspension Arm Spacer T1 Ball Connector Grease Arm Pin Pivot Ball M3x10 Set Screw © VBC Racing WILDFIRE...
  • Page 18 Make sure the dot marking is facing up Optional: F05 Suspension Mount B-02-VBC-0060-05 F10 Suspension Mount B-02-VBC-0060-10 Make sure the dot marking is facing up Optional: WildFire Front/Rear Suspenion Shim (1mm,0.5mm) D-05-VBC-0032 M3x6 Flat Head M3x6 Flat Head © VBC Racing WILDFIRE...
  • Page 19 M1.6x4 Screw C-02-SC-R1.6x4 x 2 Ball Connetor M1.6x4 Screw M2x10 Shaft Pin 0 Offset Hex Wheel Hub B-02-VBC-0051 x 2 0 Offset Hex Wheel Hub Ball Connetor B-02-VBC-0045 x 2 Do not over tighten the M1.6x4 screw to prevent stripping © VBC Racing WILDFIRE...
  • Page 20 Steering Swivel Tube B-02-VBC-0033 x 4 Turnbuckle Cup S M3x12 Set Screw C-02-SC-SS-0312 x 2 M3x6 Set Screw M3x6 Set Screw C-02-SC-SS-0306 x 2 3x23 Upright Pin Grease M3x9 Round Head Screw C-02-SC-R0308 x 2 3x23 Upright Pin M3x6 Set Screw © VBC Racing WILDFIRE...
  • Page 21 FRONT STABILIZER Tighten the set screw 4mm from the edge of the stabilizer M3x3mm Set Screw M3x3mm Set Screw Front Stabilizer 1.3 Stabilizer Connector Stabilizer Collar Optional: Front Stabilizer 1.4 White B-02-VBC-0074-14 Front Stabilizer 1.2 Green B-02-VBC-0074-12 © VBC Racing WILDFIRE...
  • Page 22 M3x10mm Set Screw C-02-SC-SS-0310 x 2 INSTALL FRONT STABILIZER M3x6mm Flat Head Screw C-02-SC-F0306 x 4 MAKE FOUR TIE RODS Graphite Stabilizer Mount M3x3mm Set Screw 1.5mm M3x6mm Flat Head Note the double ring face to ball connector © VBC Racing WILDFIRE...
  • Page 23 Note the double ring face to ball connector Shock Shaft B-02-VBC-0043 x 4 Sealer O-Ring B-03-VBC-0002 x 4 Shaft Sealer O-Ring B-03-VBC-0012 x 4 Make sure the shock shaft can move up and down freely M3 E-Clip B-02-VBC-0044 x 8 © VBC Racing WILDFIRE...
  • Page 24 Shock Spring White (For Front) x 2 Spring Bottom Support Note the double ring face to ball connector Optional VBC Racing Shock Springs: Shock Spring Red (For Rear) x 2 Shock Spring Green SOFT B-02-VBC-0073-D Shock Spring White (For Front)
  • Page 25 Ball Connector B-02-VBC-0045 x 2 M3x6 Round Head M3x6 Round Head Screw C-02-SC-SS-0306 x 6 Ball Connector M3x6 Round Head Shock Spring White 63.5mm Make sure both shocks are the same length Note the double ring face to ball connector © VBC Racing WILDFIRE...
  • Page 26 Ball Connector B-02-VBC-0045 x 2 M3x6 Round Head Screw C-02-SC-R0306 x 6 Ball Connector Ball Connector M3x6 Round Head Shock Spring Red 63.5mm Make sure both shocks are the same length Note the double ring face to ball connector © VBC Racing WILDFIRE...

  • Page 27: Install Motor

    M3x8 Round Head Screw C-02-SC-R0308 x 2 Motor not included M3x8 Round Head M3x8 Round Head Pinion set screw not included Pinion Gear not included Please make sure there is enough clearance for the gears to run smoothly © VBC Racing WILDFIRE...
  • Page 28 Servo Horn Type F A-03-VBC-0053 x 1 Servo Horn Type A A-03-VBC-0054 x 1 M3x8mm Round Head Screw C-02-SC-R0308 x 6 M3x6 Flathead C-02-SC-F0306 x 2 Ball Connector B-02-VBC-0045 x 1 Servo Washer (not included) x 4 M3x6 Flathead M3x6 Flathead © VBC Racing WILDFIRE...
  • Page 29 Front Body Post Front Body Post A-03-VBC-0013 x 2 5mm Flanged Wheel Nut M3 Lock Nut Front Bumper Bottom Support M3x10mm Flat Head M3x10mm Flat Head M3x8mm Flat Head 5mm Flanged Wheel Nut WHEELS AND TIRES NOT INCLUDED © VBC Racing WILDFIRE...
  • Page 30 M3x10mm Flat Head Screw C-02-SC-F0310 x 2 M2x12 Shaft Pin B-02-VBC-0022 x 2 Body Clip B-02-VBC-0076 x 2 Body Height Adjuster Support Body Height Adjuster Support A-03-VBC-0015 x 2 Body Height Adjuster Support M2x12 Shaft Pin M2x12 Shaft Pin © VBC Racing WILDFIRE...
  • Page 31 M2x12 Shaft Pin M2x12 Shaft Pin B-02-VBC-0022 x 2 M3x8mm Round Head Body Height Adjuster Support A-03-VBC-0015 x 2 M3x8mm Round Head INSTALL ESC, RECEIVER AND ANTENNA TUBE (these items are not included in this kit) © VBC Racing WILDFIRE...
  • Page 32 Graphite Battery Guard Spacer A-01-VBC-0032 x 2 M3x12mm Flat Head Screw x 4 C-02-SC-F0312 Graphite Adjustable Battery Guard Graphite Battery Guard Spacer M3 Lock Nut C-02-SC-NN03 x 4 M3x12mm Flat Head Graphite Adjustable Battery Guard Graphite Battery Guard Spacer M3x12mm Flat Head © VBC Racing WILDFIRE...

  • Page 33: Parts List

    PARTS LIST FOR ONLINE ORDERS, PLEASE VISIT OUR WEBSITE WWW.VBCRACING.COM OR VISIT YOUR NEAREST HOBBY STORE. PLEASE VISIT OUR WEBSITE FOR THE LATEST VBC WILDFIRE OPTION PARTS. Order Number Package Descriptions Parts Number Parts Descriptions Order Number Package Descriptions Parts Number...
  • Page 34 COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT Instruction Book P-0001.3 VBC Racing WildFire Touring Car Kit D-05-VBC-0005...