Three-Dimensional Object On Vehicle Rear; Picture Uality Adjustment - Mazda 2014 CX-5 Owner's Manual

Three-dimensional object on vehicle rear

Because the distance guide lines are displayed based on a flat surface, the distance to the
three-dimensional object displayed on the screen is different from the actual distance.
(Screen display)
Sensed distance on screen A>B>C
qPicture Quality Adjustment
WARNING
Always adjust the picture quality of the rear view monitor while the vehicle is
stopped:
Do not adjust the picture quality of the rear view monitor while driving the vehicle.
Adjusting the picture quality of the rear view monitor such as brightness, contrast,
color, and tint while driving the vehicle is dangerous as it could distract your
attention from the vehicle operation which could lead to an accident.
Picture quality adjustment can be done while the shift lever is in reverse (R).
There are four settings which can be adjusted including brightness, contrast, color, and tint.
When adjusting, pay sufficient attention to the vehicle surroundings.
1. Press the setup button (
2. Touch the
Touch the
) to display the picture quality adjustment screen.
and on-screen buttons to change the set value.
on-screen button to return to the camera image display.
(Actual condition)
A
B
C
(Actual distance) B>C=A
When Driving
Rear View Monitor
A
C B
4-109