Important Safety Instructions - Sarabec LA-240 User Manual

The manufacturer cannot be held responsible for damage which is caused by not using this
Loop System in compliance with these safety instructions.
IF IN ANY DOUBT SEEK EXPERT ADVICE
1. Read and follow these instructions taking note of any warnings.
2. Keep these instructions for future reference.
3. Do not use the system or accessories near water.
4. Do not expose the system or accessories to rain or any other source of moisture.
5. Should the amplifier require cleaning only do so with a dry cloth.
6. Ensure that there is enough room around the Loop Amplifier for ventilation purposes.
7. Do not cover the ventilation holes of the amplifier with anything.
8. Do not place the Loop Amplifier close to sources of heat, such as radiators.
9. Place all connecting and power leads such that they are not a hazard or where they
may become damaged.
10. Do not open casing of Loop Amplifier at any time; there are NO user serviceable parts.
11. Servicing must be referred to qualified service personnel.
CAUTION:
Ensure mains power is disconnected BEFORE any audio connections are made to the Loop
Amplifier. To completely disconnect the system from the mains, remove the mains plug
from the wall socket.
CAUTION:
The top surface of the amplifier may become hot when operating this system continuously.
Do not touch the top surface during use or block the ventilation holes.

Important Safety Instructions

3