Number Plate Light; Interior Lights - Opel 2016 Movano Owner's Manual

3. Remove the lamp assembly from
the aperture on the outer side.
4. Detach wiring connector from
lamp assembly.
5. Remove bulb holder from lamp
assembly and renew bulb.
6. Install bulb holder in lamp
assembly and reattach wiring
connector to lamp assembly.
7. Replace lamp assembly into
aperture, ensuring that it is seated
correctly.
8. Replace the nut onto the locating
pin on the rear of the lamp
assembly.
9. Install cover on the inside of the
rear door.

Number plate light

1. Unclip lens using a flat blade
screwdriver.
2. Remove cover and renew bulb.
3. Reinstall lens.
Vehicle care

Interior lights

Front courtesy light
1. Remove lens using a flat blade
screwdriver.
2. Renew bulb.
3. Reinstall lens.
169