Table of Contents
Advertisement
Low beam/High beam
1. Rotate the cap 1 anticlockwise
and remove it.
2. Rotate the bulb holder clockwise
to disengage. Withdraw the bulb
holder from the reflector.
3. Disengage the bulb holder from
the plug connector by pressing
the retaining lug.
4. Replace the bulb and connect
bulb holder with the plug
connector.
5. Insert the bulb holder, engaging
the two lugs into the reflector and
rotate anticlockwise to secure.
6. Fit the cap and rotate clockwise.
Vehicle care
Cornering light
1. Rotate protective cover 2
anticlockwise and remove.
179
Advertisement
Chapters
Table of Contents
