Menu Operation; Setting Menu; Closed Caption - TCL 48FD2700 User Manual

the TV plays the default language for the program
(usually "English" in the US).
Note: The "Audio Language" option is only available
for digital channels.

Setting Menu

The "Setup" menu allows you to configure the TV
with your preferences. Press MENU to diaplay the
menu screen. Press ▲/▼ to select "Setting";; then
press to display the following options:
Language
Select the OSD menu language from English,
Spanish, or French.
Channel
Signal Source: Choose the signal source ("Cable/
Sat" or "Antenna") you have connected to the
ANT/CABLE/SAT IN.
Scan: When you perform a Channel Scan, your
TV searches for channels with signals and stores
the channel information in the Channel List. Then,
as you watch TV and press CH+ or CH-­, your
TV goes to the next or previous channel in the
Channel List and skips the channels that do not
have signals. If the TV signal source changes – for
example, if you change from an outdoor antenna
to cable TV – you will need to rescan for channels.
To automatically scan for channels:
1. After choosing a signal source, select Setting >
Channel > Scan.
2. Press to start the scan. You can see
the search progress and how many channels
are found in the on-­screen menu. (Note: If
you wish to stop the search, press the CLEAR
button.)
3. After the scan is complete, the unit will exit
menu automatically.
Favorite:
1. Select "Setting > Channel > Favorite", press
to enter, a list of available channels
displayed.
2. Press ▲/▼ to select the desired chanel, then
press OK to set it as the favorite, and a heart
icon appears to the right side of the channel
indicating this channel already stored in the
favorite channel list.
3. Set other favorite channels the same way.
4. You can easily select the favorite channel to
watch using FAV and ▲/▼ buttons.
Show/Hide: You can hide channels in the Channel
List. Then, when you press the CH+ or CH- button,
the TV will skip the hidden channels. You can still
tune to these hidden channels by pressing the
number of the channel on the numeric keypad.
To hide specific channels:
1. Select "Show/Hide", press
submenu.
2. Press ▲/▼ to highlight the channel you wish
to hide;; then press OK to check the highlighted
channel. You can add the channel back into the
Channel List by highlighting it and un-­checking
it.
3. Repeat the process to hide additional channels.
4. Press MENU to return to the previous menu, or
press CLEAR to close the menu.
DTV Signal: Show the condition of DTV signal:
Good or Bad, Normal. Bad for no DTV signal or
very weak DTV signal.

Closed Caption

Many programs are encoded with closed captioning
information, which allows you to display the audio
portion of a program as text on the TV screen.
Note: Closed caption settings are not available for
HDMI, CMPT or inputs. These settings must be
captioning is not available on all channels at all
closed captioning information.
The Closed Caption options are:
CC Mode: This option allows you to choose the
way closed captioning information appears on the
screen.
CC Off - No captioning information displayed.
CC On - Chooses this option if you want
captioning information to be shown whenever
available.
On When Mute - This option allows the
closed captioning to display (when available)
whenever the TV's sound is muted. The
captioning information is not displayed when the
sound is not muted.
Analog CC Option: This option lets you select
the captioning mode (CC1-­CC4 or TEXT1-­TEXT4)
used for displaying caption information, when
available. If you are unsure of the differences
among the modes, you may prefer to leave the
closed captioned mode set to CC1, which displays
complete text of the program in the primary
language in your area.
14

Menu Operation

to open the