Setting and canceling the functions
n
To switch between set and canceled, follow the procedure below:
STEP
1
Close all the doors and turn the engine switch to the "ON"
position. (Perform step 2 within 10 seconds.)
STEP
2
Function
Shift position linked door lock-
ing function
Shift position linked door
unlocking function
Speed linked door locking func-
tion
Driver's door linked door unlock-
ing function
When the setting or canceling operation is complete, all doors are
locked and then unlocked.
1-2. Opening, closing and locking the doors
Shift the shift lever to P or N, and
press and hold the driver's door
lock switch (
imately 5 seconds and then
release.
The shift lever and switch posi-
tions
desired function to be set or can-
celed are shown as follows.
Shift lever
position
P
N
I n f o r ma t i o n P r o v i d e d b y :
or
) for approx-
corresponding
to
Switch position
1
the
35