Getting Started; Set-Up; Charging The Battery - Alcatel 10-13X User Manual

1

Getting started .....................

1.1

Set-up

Removing and installing the back cover
Removing and installing the battery
Inserting and removing the SIM card
1013X
Check with your network operator to make sure that your SIM card is 3V or
(1)
1.8V compatible. The old 5 Volt cards can no longer be used. Please contact
your operator.
(1)
13
1013D
Place the SIM card with the chip facing downwards and slide it into its
housing. Make sure that it is correctly inserted. To remove the card, press
it and slide it out.
Your phone only supports mini SIM card. Do not attempt to insert
other SIM types like micro and nano cards, otherwise this can cause
damage to your phone.

Charging the battery

Connect battery charger to your phone and plug into the socket.
• Charging may take about 20 minutes to start if the battery is out of
power.
• Be careful not to force the plug into the socket.
• Make sure the battery is correctly inserted before connecting the
charger.
• The main socket must be close to the phone and easily accessible (avoid
electric extension cables).
14