Toyota 2008 Corolla Owner's Manual page 90

TO USE THE ANCHOR BRACKET:
1. Remove the head restraint.
80
'08 Corolla_U (L/O 0706)
2. Open the lid of the anchor bracket. 3. Securely fasten the child restraint
system with the seat belt.
Latch the hook onto the anchor
bracket and tighten the top strap.
For instructions to install the child re-
straint system, see "Child restraint" on
page 66 in this Section.
CAUTION
Make sure the top strap is securely
latched, and check that the child re-
straint system is secure by pushing
and pulling it in different directions.
Follow all the installation instructions
provided by its manufacturer.
2008 COROLLA from Aug. '07 Prod. (OM12B28U)