Toyota 2006 Tacoma Owner's Manual page 296

06 01.06
LS73007
3. Install the rubber cover as shown
and fit it securely on the boss. Then
plug in the connector.
Make sure the rubber cover fits securely
on the bulb base and the mounting body.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.
384
—Front fog lights
LS73020
1. Turn the bulb base counterclockwise
and remove it.
If the connector is tight, wiggle it.
2006 TACOMA from Jan.'06 Prod. (OM35865U)
LS73021
2. Pull the bulb out of the base. Install
a new bulb.