CS-434HU/HC MICROCOMPUTER’S TERMINAL DESCRIPTION Microcomputer : uPD703034AYGF-M01-3BA (IC1 : X25) Pin name Description Processing Operation CD4.7V ON “L” CD4.7V SW for CD4.7V CD4.7V OFF “H” CD mechanism starting “L” Not used CD DATA CD data For CD mechanism communication Motor ON “H”...
Page 4
CS-434HU/HC MICROCOMPUTER’S TERMINAL DESCRIPTION Pin name Description Processing Operation 31,32 Not used System ACC ON “H” SYS ON System control System ACC OFF “L” System ACC ON “H” Reset “L” RESET System reset input Reset voltage: 4.1V Not used Not used...
Page 6
(exposed parts are acceptably insulated from the supply circuit) before the appliance is returned to the customer. • DC voltages are as measured with a high CS-434HU/HC impedance voltmeter. Values may vary slightly due to variations between individual instruments or/and units.