5.
Perform the following steps as shown in the illustration:
a. Disconnect the keyboard cable from the system board [1].
b. Lift the keyboard cable to remove it from the computer [2].
Installing the Keyboard
1.
Connect the keyboard cable to the connector on the system board.
2.
Slide the keyboard into the retention slots.
3.
Press along the top edges to lock the keyboard in place.
4.
Install the battery.
5.
Follow the procedures in
Removing the Base Cover
1.
Follow the procedures in
2.
Remove:
a.
battery
After Working Inside Your computer
Before Working Inside Your
.
Computer.
15
Need help?
Do you have a question about the Vostro 15-3558 and is the answer not in the manual?