TECC iClear Series User Manual

The iClear electronic cigarette is an ideal kit for both new and experienced users of electronic cigarettes
who are looking for a high quality and easy to use rechargeable electronic cigarette.
The iClear uses transparent cartomizers, which hold 0.9ml of e-liquid allowing easy viewing of the
remaining fluid level, combined with a unique induction charging system which allows the user to charge
the electronic cigarette without taking it apart.
This unique kit is the newest in cartomizer and charging technology,
providing you with an attractive e-cig at an affordable price.

Kit Contents:


1 x Rechargeable 180mAh Lithium Battery

2 x Empty Refillable Cartomizers

10ml TECC Titan Fluid

10ml Needle Filling Bottle

1 x USB Magnetic Charger

1 x User Manual
Assembly & Use – Screw a filled cartomizer onto the battery, finger tight. Gently inhale for 3-5 seconds
and exhale when ready.
Charging – When the battery flashes rapidly or the vapour production reduces, whilst the cartomizer
contains fluid, the battery requires charging.
Insert the charger into a USB port; a blue light will display.
Insert the iClear e-cig without disassembling the components, end down, into the hole at the end of the
charger. You will it click as the magnet engages. The light on the charger will flash blue then turn to red
to indicate a successful connection and blink/fill incrementally until complete. Once the light returns to
blue, the battery is fully charged.
Charging normally takes around 90-150 minutes depending on the source of power.
If the contact between the battery and charger is not established, the charger will continually flash blue.
Remove the battery and clean the contact before reinserting.

Cartomizer Refilling


Remove the rubber cap either by hand or with a pin/paperclip.

A blunt ended syringe or refilling needle is required – fill the cartomizer using via either of the
two small holes on the outer edges of the cartomizer.
iClear User Guide