Blades - Honda 2016 CR-Z Owner's Manual

Blade
Retainer
Blade
Indent
uuChecking and Maintaining Wiper BladesuChanging the Front Wiper Blade Rubber
4. Slide the wiper blade out from its holder by
pulling from the end of the blade having
the molded-in stopper block.
5. Remove the retainers from the old rubber
blade, and mount to a new rubber blade.
Correctly align the rubber protrusion and
u
the retainer grooves.
6. Pull the new wiper blade onto the holder
from the end not having the stopper block.
u The tabs on the holder should fit in the
indents of the wiper blade.
7. Slide the wiper holder onto the wiper arm,
then push down the lock tab.
8. Lower the passenger side wiper arm first,
then the driver side.
329