Pioneer VSX-830-K Quick Start Manual page 3

Use "Start-up Navi" app to perform
connection and initial settings
• Use a smartphone/tablet.
• Network connection is required.
LAN
1
Download and start "Start-up Navi" app.
2
Proceed along with the app guidance to
perform connection and initial settings.
Download "Start-up Navi" app from here.
 If you have an iPhone or iPad
Please search for "Start-up Navi" app in the App
Store.
 If you have an Android device
Please search for "Start-up Navi" app in Google
Play.
Connection and initial setup Connection and initial setup
Perform connection and initial settings in any of the ways listed below. Perform connection and initial settings in any of the ways listed below.
Follow the guidance of the built-in
AVNavigator to perform connection
and initial settings
• Use a Mac/PC.
• Network connection is required.
1
Please read the booklet "If you have a Mac/
PC".
2
Follow the guidance of the AVNavigator
built into the receiver to proceed with the
connection and initial settings.
Follow the instructions in the Follow the instructions in the
booklet to perform connection and booklet to perform connection and
initial settings. initial settings.
1
Read the booklet in the order of
LAN
2
Follow the instructions of each step to
proceed.
Regarding WIRELESS indicator flashing
• Flashes when using WAC Mode. (Mode where network
settings can be changed, when this receiver is being
used as a Wi-Fi Access point)
Does not flash after network configuration and after
making a wired LAN connection.
• When not making a network connection, there is no
problem using it as is.

.

3