DreamGEAR GRX-670 Headset page 7

3. Connect the pass-through RCA cable into the analog "audio
out" port on your television.
NOTE: Please refer to the user guide for your television to nd
which ports to plug the RCAs into.
4. Connect the USB plug on the Control Box into your Xbox 360.
5. Plug the 3.5mm side of the included gray Xbox 360 cable
into the Xbox 360 controller port of the control box
Plug the 2.5mm side of the included Xbox 360 cable into the
bo om of the Xbox 360 controller.
6. Refer to the user guide for your Xbox 360 for initial volume
management.
7. Follow the steps under "Control panel" on this user guide to
use the volume and mute features.
NOTES:
• To use the pass-through function of the RCA cables, plug
your RCA enabled device (red and white plugs) into the
backside of the pass-through RCA cable.
• If the USB cable is too short to reach the Xbox 360, use the
included USB extender. To use the USB extender, plug the USB
plug on the control box into the female plug of the USB
extender and plug the USB extender into the Xbox 360.
How to use the GRX-670 with the Wii U
TM
1. Connect the 3.5mm plug at the end of the GRX-670 to the
headphone port located at top of the Wii U GamePad.
NOTE: Volume can be adjusted by using the volume control on
the Wii U GamePad.