DreamGEAR GRX-670 Headset page 6

How to use the GRX-670 with Playstation®3
1. Connect the 3.5mm plug at the end of the GRX-670 to the
control box with gaming cables
2. Plug the green male 3.5mm plug on the control box with
gaming cables into the female green 3.5mm plug on the
pass-through RCA cable.
3. Connect the pass-through RCA cable into the analog "audio
out" port on your television.
NOTE: Please refer to the user guide for your television to nd
which ports to plug the RCAs into.
4. Connect the USB plug on the control box into your PS3.
5. Refer to the user guide for your PS3 to set up a new
audio accessory.
6. Follow the steps under "Control panel" on this user guide to
use the volume and mute features.
NOTES:
• To use the pass-through function of the RCA cables, plug
your RCA enabled device (red and white plugs) into the
backside of the pass-through RCA cable.
• If the USB cable is too short to reach the PS3, use the
included USB extender. To use the USB extender, plug the USB
plug on the control box into the female plug of the USB
extender and plug the USB extender into the PS3.
How to use the GRX-670 with Xbox 360®
1. Connect the 3.5mm plug at the end of the GRX-670 to the
control box with gaming cables
2. Plug the green male 3.5mm plug on the control box with
gaming cables into the female green 3.5mm plug on the
pass-through RCA cable.