Wiring Heat Pump - Honeywell RTH2510 Series Quick Installation Manual

Advanced Installation Guide
Connect wires: Heat Pump
1. Match each labeled wire with same letter on new
2. Use a screwdriver to loosen screws, insert wires into
3. Push any excess wire back into the wall opening.
Labels don't match? See page 24.
Wiring complete, return to Step 7.
69-2726ES—02
69-2726ES_A.indd 24
Wiring—Heat Pump About your new thermostat
thermostat.
hole under screw, then tighten screws until wire is
secure.
B O G Y W/
AUX
24
R Rc
M32727
5/4/12 11:33 AM