Table of Contents
Advertisement
CD-SW250DVD
From 7-1 Page
Is focus control signal output from pin 208 of IC3201 to pin 16 of
IC3001 ?
Is focus control drive voltage output from pins 1 and 2 of IC3001
?
Is focus control drive voltage applied to the focus actuator termi-
nal ? (Pin 23 and 24 of CN3001)
Check connection of optical pickup cables.
If no abnormality is detected, replace the optical pickup mecha-
nism unit.
• "No Disc" is displayed during DVD playback (when CD is playable) ... When DVD laser does not light up.
Is control signal output from pin 15 of IC3101 ?
Is voltage of 5 V applied to emitter of Q3105 ?
Is voltage of approx. 2.3 V supplied to pin 2 of CN3001 ?
Check connection of optical pickup cables.
If no abnormality is detected, replace optical pickup mechanism
unit.
Yes
Yes
Yes
Yes
Yes
Yes
No
Check focus control signal line between IC3201 and IC3001.
Check M7V line.
No
Is voltage of 7 V applied to pin 27 of IC3001 ?
Check that pin 29 of IC3704 is "H" and replace IC3001.
If pin 29 of IC3001 is "L", check pin 160 of IC3201.
No
Check line between IC3001 and focus actuator terminal. Check
CN3001.
No
Check and replace IC3101.
No
Check S5V line.
No
Check around Q3105 and Q3101.
Note: The laser diode is easily damaged by static electricity.
Carefully check static electricity and electric leak of the measuring
instrument.
7 – 2
No
Yes
Advertisement
Table of Contents
