Keyless Entry System; Pushbutton Start - GMC Yukon Denali 2016 Getting To Know Manual

Keyless Entry System

The Keyless Entry System enables operation of the doors and ignition without removing
the Remote Keyless Entry transmitter from a pocket or purse. The transmitter must be
within 3 feet of the door being unlocked or the liftgate.
Keyless Unlocking
With the transmitter within range:
Press the lock button on the driver's door
handle to unlock the driver's door; press it
again within 5 seconds to unlock all doors.
Press the lock button on a passenger door
handle to unlock all doors.
Press the touchpad on the liftgate handle
to open the liftgate.
Keyless Locking
With the ignition off, the transmitter out of the vehicle, and all doors closed:
Press the lock button on any door handle to lock all doors immediately.
If Passive Locking is turned on, all doors will lock automatically after a short delay once
all doors are closed.
Note: To program the door lock and unlock settings, go to Remote Lock, Unlock, Start in the Vehicle
Settings menu.

Pushbutton Start

Starting the Engine
With the vehicle in Park or Neutral, press
the brake pedal and then press and hold
the ENGINE START/STOP button to start
the engine.
Note: The transmitter must be in the vehicle to turn
on the ignition. If the transmitter battery is weak,
place the transmitter in the pocket in the center
console to enable the engine to start. Replace the
transmitter battery as soon as possible.
Stopping the Engine
Shift to Park and press the ENGINE START/STOP button to turn off the engine.
Accessory
With the engine off and the brake pedal NOT depressed, press the ENGINE START/
STOP button to place the ignition system in the accessory position.
F
Optional equipment
See Keys, Doors and Windows in your Owner Manual.
See Driving and Operating in your Owner Manual.
5