Fit light assembly with the
retaining pins into the recesses of
the vehicle body and tighten the
securing nut from inside the load
compartment. Pull the circular
gasket over the recess in the lamp
housing.
Close cover and engage.
Reversing light/rear fog light
Left-hand drive vehicles
Reversing light is located on the right
side of the bumper, and the rear fog
light is located on the left side of the
bumper.
Right-hand drive vehicles
Reversing light is located on the left
side of the bumper, and the rear fog
light is located on the right side of the
bumper.
The description of bulb replacement
is the same for both lights.
1. Undo screw and remove cover.
2. Undo screw and remove light
assembly from the bumper.
Vehicle care
3. Disengage and remove the bulb
socket by turning anticlockwise.
167