Tail Lights - Opel 2015 Adam Owner's Manual

2. Remove the cover by pulling with
fingers at the marked positions,
see arrows in the illustration.
3. Undo both screws and remove
light assembly from the bumper.
4. Disengage and remove the bulb
socket by turning anticlockwise.
Vehicle care
5. Remove bulb by turning
anticlockwise slightly and
withdrawing. Replace the bulb.
6. Insert the bulb socket into the
assembly and turn clockwise.
7. Attach light assembly into the
bumper and fix with both screws.
8. Insert and engage cover into the
bumper. Insert small cap.

Tail lights

Versions with subwoofer box
Remove the load compartment floor
cover, on right side also remove the
tool box to gain access to the cover
3 68.
Versions with storage box
Remove storage box to gain access
to the cover 3 66.
165