Introduction - Pioneer DVD Installation Manual

C h a p t e r 4
Chan
Vol
Page
Stop
1 2 3
4 5 6
9
7 8
0
The TV INPUT button can control
the video signal—or "input"—your
®
TV displays. Changing the input changes
the source of the video displayed on your
TV. TV inputs can include video from a
VCR, Recorder, or a video camera.
32
S e t t i n g U p t h e R e m o t e C o n t r o l

Introduction

Before programming the remote control, you must first:
1. Insert batteries. See the inside front cover of the User's Guide for instructions.
2. Complete Guided Setup. See the User's Guide for instructions.
Using the Remote with a TV and A/V Stereo System
The remote control will already work with your Pioneer DVD Recorder with TiVo. You
can also set it up to control your TV and A/V stereo system. For example:
• Control TV power, volume, mute, and input settings: Complete the instructions on
pages 33–35 using the first column in each of the tables (TV power, volume, mute, and
TV input). To control just the TV input, follow the instructions using the second
column (TV input).
• Control TV and A/V receiver power; A/V stereo system volume and mute: Complete
the instructions on pages 33–35 using the first column in each of the tables. Then
repeat the instructions using the third column (A/V receiver power, volume, and
mute). In this case, the TV POWER button turns on/off the TV and the A/V receiver at
the same time. The VOLUME and MUTE buttons control only the A/V receiver.
• Control TV power and A/V stereo system volume and mute: Complete the
instructions on pages 33–35 using the first column in each of the tables. Then repeat
the instructions using the fourth column (A/V receiver volume and mute). The
VOLUME and MUTE buttons control only the A/V receiver.