Changing The Focus Setting - Canon EOS M10 User Manual

Changing the Focus Setting

You can change default camera operation of constantly focusing on
subjects it is aimed at, even when the shutter button is not pressed.
Instead, you can limit camera focusing to the moment you press the
shutter button halfway.
● Press the [
[Continuous AF] on the [
then choose [Off] ( = 32).
Helps avoid missing sudden photo opportunities, because
On the camera constantly focuses on subjects until you press
the shutter button halfway.
Conserves battery power, because the camera does not
Off
focus constantly. However, this may delay focusing.
Fine-Tuning the Focus
Still Images Movies
Fine-tune autofocusing with an EF-M lens attached by turning the focusing
ring.
] button, choose
2] tab, and
Still Images
1
Configure the setting.
● Press the [ ] button, choose [Focus
mode] on the [ 2] tab, and then choose
[AF+MF] ( = 32).
2
Focus.
● Press the shutter button halfway to focus
on the subject, and continue holding the
button halfway down.
3
Fine-tune the focus.
● Turn the focusing ring on the lens to
adjust the focus.
● [MF] blinks on the screen.
● To cancel focusing, release the shutter
button.
4
Shoot.
● Press the shutter button all the way down
to shoot.
Cannot be used with Servo AF ( = 73).
●
● Not available with lenses other than EF-M lenses.
Before Use
Basic Guide
Movies
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
74