Toyota 2006 Sequoia Owner's Manual page 245

Replace the battery by using the following
procedures:
1. Pull the case out while pushing the
lock release button to the side.
'06_SEQUOIA_U (L/O 0508)
2. Remove the discharged battery.
3. Put in a new battery with the positive
(+) side up.
Put in the case securely.
NOTICE
z Make sure that the positive side of
the controller battery is facing cor-
rectly.
z Do not replace the battery with wet
hands. Water may cause rust.
z Do not touch or move any compo-
nents inside of the controller, or it
may interfere with proper operation.
z Be careful not to bend the electrode
of the controller battery insertion
and that dust or oil does not ad-
here to the transmitter case.
z Close the battery case securely.
After replacing the battery, check that the
controller operates properly. If the control-
ler still does not operate properly, contact
your Toyota dealer.
235