Hitachi 46UX51K Service Manual page 15

CUSTOMIZED PICTURE AND SOUND ADJUSTMENTS
Select VIDEO to adjust picture settings and improve picture quality
Use the CURSOR A or 7 buttons to highlight the function to be adjusted.
Press the CURSOR 4 or ) buttons to adjust the function.
Press EXIT to quit menu.
I
NOTE: If CONTRAST is selected, you are adjusting CONTRAST. The additional menu items BRIGHTNESS,
COLOR, TINT, and SHARPNESS can be selected and adjusted in the same manner.
I
Use this function to change the contrast between black and white levels in the picture. This
adjustment will only affect the picture when ADVANCED SETTINGS ULTRA Al is OFF
pikziq
Use this function to adjust the overall picture brightness
I
COLOR
Use this function to adjust the level of color in the picture
TINT
Use this function to adjust flesh tones so they appear natural.
I
SHARPNESS
Use this function to adjust the amount of fine detail in the picture.
m conditions.
When RESET is selected, press CURSOR ) to return video adjustments to factory preset
Press the front panel
MAGIC FOCUS
button momentarily
for auto setup.
AUTO DIGITAL
CONVERGENCE
To adjust manually, press and hold the MAGIC FOCUS button until CENTER MODE or STATIC MODE is displayed.
Press ENTER on the remote to select red or blue. Green is stationary. Use the cursor buttons to adjust. Center mode
only adjusts the center section, Static mode adjusts the entire screen. Note: This new data is in RAM memory only
and will be lost if the MAGIC FOCUS button is pressed again.
15