Panasonic SA-HT340GC Service Manual page 2

SA-HT340GC / SA-HT340GCS / SA-HT340GS
(5) DVD-RW [DVD-Video, DVD-VR, MP3(*2,7), JPEG(*4,7),
MPEG4(*5,7), DivX(*6,7)]
(6) +R/RW [Video]
(7) +R DL [Video]
(8) CD, CD-R/RW [CD-DA, Video CD, SVCD(*1), MP3(*2,7),
WMA(*3,7), JPEG(*4,7), MPEG4(*5,7), DivX (*6,7), HighMAT
Level 2 (Audio and Image)]
*1 Conforming to IEC62107
*2 MPEG-1 Layer 3, MPEG-2 Layer 3
*3 Windows Media Audio Ver.9.0 L3
lNot compatible with Multiple Bit Rate (MBR)
*4 Exif Ver 2.1 JPEG Baseline files
lPicture resolution: between 160 x 120 and 6144 x 4096
pixels (Sub sampling is 4:0:0, 4:2:0, 4:2:2, 4:4:4). Extremely
long and narrow pictures may not be displayed.
*5 MPEG4 data recorded with Panasonic SD multi cameras or
DVD video recorders.
lConforming to SD VIDEO specifications (ASF standard)/
MPEG4 (Simple Profile) video system/G.726 audio system.
*6 Plays all versions of DivX® video (including DivX® 6) with
standard playback of DivX® media files. Certified to the DivX
Home Theater Profile.
lGMC (Global Motion Compensation) is not supported.
*7 The total combined maximum number of recognizable audio,
picture and video contents and groups: 4000 audio, picture
and video contents and 400 groups.
Pick up:
Wavelength:
lCD:
lDVD:
Laser power:
lCD:
lDVD:
Audio output (DISC):
Number of channels:
Audio performance:
Frequency response:
DVD (linear audio):
CD-Audio:
S/N ratio:
CD-Audio:
Dynamic range:
DVD (linear audio):
CD-Audio:
Total harmonic distortion:
CD-Audio:
lVideo section
Video system:
Signal system:
Composite video output:
Output level:
Terminal:
S-video output:
785nm
662nm
CLASS 1M
CLASS 1
5.1 ch (FL, FR, C, SL, SR,
SW)
4 Hz-22 kHz (48 kHz sampling)
4 Hz-44 kHz (96 kHz sampling)
4 Hz-20 kHz
105 dB
95 dB
95 dB
0.005 %
PAL 625/50, PAL 525/60,
NTSC
1 Vp-p (75 Ω)
Pin jack (1 system)
Y output level:
C output level:
Terminal
Component video output: [NTSC: 480p/480i, PAL:576p/576i]
Y output level:
P output level:
B
P output level:
R
Terminal:
Power consumption in standby mode:
Note:
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
Solder:
This model uses lead free solder (PbF).
Mechanism:
This model uses DL2SU (Single tray) mechanism.
Power supply:
This model uses Switching Mode Power Supply (SMPS)
Module for power-up unit.
Refer to the original service manual for *1, *2, *3, *4.
2
1 Vp-p (75 Ω)
PAL; 0.3Vp-p (75Ω)
NTSC; 0.286 Vp-p (75 Ω)
S terminal (1 system)
1.7 Vp-p (75 Ω)
0.7 Vp-p (75 Ω)
0.7 Vp-p (75 Ω)
Pin jack (Y: green, P : blue,
B
P : red) (1 system)
R
approx 1W