Advertisement
9of 8
BMW CPT 9000 Installation Instructions
Page
MY 2003 X5 (E53)
September 2003
Apply adhesion promoter to both sides of rear bumper where antenna will be mounted, make
sure surfaces are clean prior to applying adhesion promoter.
Reference illustration S84 04 U77
After peeling away one side of the orange plastic from double sided foam tape (2), (included
with antenna kit) apply tape to antenna pressing and holding firmly in place for approximately 15
seconds.
Installation of bumper antenna
Position antenna (1) inside of rear bumper
BMW of North America
Instructions Part Number
Product Engineering Department
01 29 0 391 028
Advertisement
