Motorola digital cellular phone Manual page 76

Shortcut:
‰,
Press then
press and hold
‰,
and continue
with step 3 if you
have messages.
76
If the caller has restricted transmission of the phone number,
your phone will display
information is not available to the cellular network, your
phone will display
Caller ID list as one of the last 20 incoming calls.
You can store any number contained in your Caller ID memory
to a memory location in the same way you would save any
phone number. Once the correct number is displayed, press
¬ and a memory location or « to autoload. See "Storing
with the Menu" on page 44 for more information on storing
phone numbers.
Note: Caller ID is not available in all markets. Contact your
Service Provider for availability information.
To Use Caller ID
1. Follow the steps in the "Getting to Phone Options..."
block above to scroll to
Caller ID XX No's
numbers stored.
2. Press
to enter your Caller ID number list.
3. Press
to scroll through the list. The display shows
or
the call number in the upper left corner, with the
phone number of the last phone call displayed as
, the next to last as
C00
If no numbers are in the caller ID list, you see
4. Press æ to dial the displayed number.
Note: To view Caller ID information prior to answering a call,
you must turn off the Open to Answer feature. (See "Open to
Answer" on page 82.)
Clearing Caller ID
To erase all entries saved in your Caller ID memory:
1. Press and hold Ç when a Caller ID name and
number is displayed. You will see
2. Press ¬ to clear.
or
Press º to cancel and leave your caller ID memory
intact.
. If the Calling Number ID
Private
. This information will not be in the
No ID
Caller ID
. ( XX ) represents the total
, and so on, through
C01
. You will see
.
C19
Empty
.
Clear?
.