Repair Instruction - Philips RI7200/00 Service Manual

STAND:
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
• Push with a small screwdriver the 2 hooks inside the
stand.
• Press both arm-flaps like shown, that you can remove the
arm from the stand.
Circuit diagram
Motor assy
Black Green
2
3
1
4
5
Brown
Red Orange
Max speed
Blue
MAINS

REPAIR INSTRUCTION

Mounting gearwheels
When mounting the gearwheels make sure that the cams
of the gearwheels are situated at the front of the beaters.
The angle between the beaters must be 45°.
So when carrying out a repair be sure that the gearwheels
are mounted correctly (see Fig. 1).
90
°
Lubrication
Use graphite grease code no. 4822 390 20004 to grease the
appliance on the following points:
1. Spaces between the teeth of the wormwheels.
2. Both sides of the wormwheel shaft.
Motor
The motor cannot operate properly, when, due to
contamination, carbon brush is unable to move freely in
guide bush and consequently cannot be pressed against the
commutator.
OPTIONAL (accessories)
• No specific issues.
R I 7200/00
R I 7200/01
HR7200/00
HR1576/00
45
°
Fig. 1
2-5