Remote Control Unit - C.E.C. DA3N Owner's Manual

Remote Control Unit

● Buttons function
❶ to buttons can be used for DA3N and the other buttons for CD
Transport TL3N.
❶ VOL-UP Button
Press to increase the volume.
❷ VOL-DN Button
Press to decrease the volume.
❸ OPT1 Button
Press to select the optical input with round mini terminal on the
front panel.
❹ OPT Button
Press to select the optical input with squared TOS Link terminal.
❺ OPT3 Button
Press to select the optical input with squared TOS Link terminal.
❻ AES/EBU Button
Press to select the AES/EBU input.
❼ COAX Button
Press to select the Coaxial input.
❽ SL1 Button
Press to select the SUPERLINK input with BNC terminals
❾ SL Button
Press to select the SUPERLINK input with D-SUB 9 terminal.
❿ USB1 Button
Press to select the USB mini B input on the front panel.
USB Button
Press to select the USB B input.
DF Button
Press to select a digital filter FLAT or PULSE.
Lower the volume before changing the input to avoid changing
noise, sudden big sound, or headphone / speaker damage!
● Precautions on Using the Remote Control Unit
❶ When operating the remote control, point it towards the remote sensor
on the DA3N's front panel. Make sure nothing is blocking the front panel
where the remote sensor is located.
❷ Avoid exposing the remote sensor on the front panel to direct sunlight or
other light sources, as such exposure can cause malfunction.
❸ The remote control unit may malfunction when its batteries are running
DA3N User's Manual
❶
❷
❸
❻
❹
❼
❺
❿
❽
❾
17