Advertisement
GB
4. Remove the cable charger.
Pairing the B-Speech® TX2 with the receiver
"Pairing" means making a wireless connection between the
transmitter and the Bluetooth receiver.
Before being able to use B-Speech® TX2 with a receiver,
you need to pair them.
After being turned on, the transmitter automatically scans,
pairs and connects to the receiver.
Once pairing is established, both devices search for each
other and connect automatically whenever they are
switched on.
Important note: B-Speech® TX2 pairs only with receivers
which have a factory PIN-Code equal to '0000', '1234' or
'8888'.
After pairing, you can use B-Speech® TX2 with the
Bluetooth receiver.
If you wish to use B-Speech® TX2 with another receiver,
you need to pair them also.
In this case, B-Speech® TX2 will not re-connect with the
previous device until you pair them again.
- 15 -
Advertisement
