Advertisement
Quick Links
Advertisement
Summary of Contents for D-Parts B-Speech Tx2
- Page 2 Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user's authority to operate the equipment. 15.105(b) This equipment has been tested and found to com- ply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
- Page 3 Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
- Page 4 B-Speech® Stereo Transmitter TX2 User guide Introduction The B-Speech® TX2 offers the latest in Bluetooth technology. The B-Speech® TX2 transmits music data from players which are not Bluetooth capable (e.g.: MP3 and CD player, stereo and other players) to a Bluetooth receiver such as the stereo headset B-Speech®...
-
Page 5: Technical Data
Technical data: · Bluetooth V. 2.0, Class II, 10 meters · Bluetooth stereo profile: A2DP · Frequency: 2.4 GHz · High Quality stereo IC · Certified CE and FCC · 3,5 mm stereo connector · Sleep mode for energy saving ·... - Page 6 Get acquainted with the B-Speech® TX2 On / Off switch LED indicator 90° swivel 3,5 mm (under the cover) connector Mini USB charger connection Charging 1. Connect the USB plug on the other end of the cable charger to the USB input of your PC, laptop or optional power supply.
- Page 7 4. Remove the cable charger. Pairing the B-Speech® TX2 with the receiver "Pairing" means making a wireless connection between the transmitter and the Bluetooth receiver. Before being able to use B-Speech® TX2 with a receiver, you need to pair them. After being turned on, the transmitter automatically scans, pairs and connects to the receiver.
-
Page 8: The Pairing Process
The pairing process 1. Before pairing, please check that both devices are fully charged. 2. Check that both devices are within 3 meters of each other. 3. Turn the Bluetooth receiver on and make sure it is in pairing mode. (If in doubt, read your receiver user guide). 4. -
Page 9: Playing Music
Playing music 1. Insert the connector of the turned on B-Speech® TX2 into the 3,5 mm socket of the source device. 2. Make sure the receiver is turned on and within10 meters of the B-Speech® TX2. 3. The red and blue LED from the B-Speech® TX2 indicates that a Bluetooth connection exists by flashing slowly at same time. -
Page 10: Visual Indicators
To start the search or pairing function again put the Bluetooth receiver in search mode or start the pairing process. Visual indicators State of the device State of the LED Pairing or Establishing The red and blue LED flash a connection alternatively Connected and playing The blue and red LED flash...