Fujitsu ASU9RLS3 Design & Technical Manual page 33

8) Indoor unit fan control for energy saving for cooling
Enable or disable the power-saving function by controlling the indoor unit fan rotation when the
outdoor unit is stopped during cooling operation.
Function number
49
00: When the outdoor unit is stopped, the indoor unit fan operates continuously following
the setting on the remote controller.
01: When the outdoor unit is stopped, the indoor unit fan operates intermittently at a very
low speed.
9) Room temperature control for wired remote controller sensor
Refer to Function 95, before performing this setting.
Depending on the installed environment, correction of the wired remote controller temperature
sensor may be required. Select the appropriate control setting according to the installed
environment.
To change this setting, set Function 42 to Both "01".
Ensure that the Thermo Sensor icon is displayed on the remote controller screen.
Function number
92 93
(For cooling) (For heating)
Setting value Setting description
00
01
Setting value Setting description
00 No correction 0.0°F(0.0°C)
01 No correction 0.0°F (0.0°C)
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
- (01 - 30) -
(  ... Factory setting)
Disable

Enable
(  ... Factory setting)

-1°F (-0.5°C)
-2°F (-1.0°C)
-3°F (-1.5°C)
More Cooling
-4°F (-2.0°C)
-5°F (-2.5°C)
Less Heating
-6°F (-3.0°C)
-7°F (-3.5°C)
-8°F (-4.0°C)
+1°F (+0.5°C)
+2°F (+1.0°C)
+3°F (+1.5°C)
Less Cooling
+4°F (+2.0°C)
+5°F (+2.5°C)
More Heating
+6°F (+3.0°C)
+7°F (+3.5°C)
+8°F (+4.0°C)