Specifications; Installation - Kenwood KAC-9405 Service Manual

KAC-8405
KAC-9405/9405M
Audio Section
Max Power Output ................................... 720 W (180 W × 4)
Rated Power Output (+B = 14.4V)
Normal (4 Ω) (20 Hz – 20 kHz, ≤ 0.08 % THD) ..... 60 W × 4
(2 Ω) (1 kHz, ≤ 0.8 % THD) ...................... 90 W × 4
Bridged (4 Ω) (1 kHz, ≤ 0.8 % THD) ................... 180 W × 2
Speaker impedance ................................................2 Ω – 8 Ω
Frequency Response (+0, –3 dB) .....................5 Hz – 50 kHz
Sensitivity (rated output)
MAX. ...........................................................................0.2 V
MIN. ............................................................................5.0 V
Signal to Noise Ratio .................................................... 95 dB
Input Impedance .......................................................... 10 kΩ
Low Pass Filter Frequency (-12 dB/oct.)
................................................... 50 Hz – 200 Hz (variable)
High Pass Filter Frequency (-12 dB/oct.)
................................................... 50 Hz – 200 Hz (variable)
Bass Boost Control (40 Hz / B channel) ................0 / +18 dB

SPECIFICATIONS

General
Operating Voltage .......................14.4 V (11 – 16 V allowable)
Current Consumption ......................................................34 A
Dimensions (W × H × D) ......................... 280 × 59 × 238 mm
Weight ............................................................ 2.8 kg (6.1 lbs)
CEA-2006: K, E type only
4 Ω – 8 Ω (Bridged)
RMS Watts per channel @ 4 ohms, ≤ 1% THD+N
Signal to Noise Ratio (Reference: 1Watt into 4 ohms)
KENWOOD follows a policy of continuous advancements
in development. For this reason specifi cations may be
changed without notice.

INSTALLATION

280 mm
240 mm
ø 4.6
259 mm
............................................................................ 60 W × 4
............................................................................... 80 dBA
11 × 2-5/16 × 9-3/8 inch