Programmed Playback - LG OM7550 Owner's Manual

34 Operating

Programmed Playback

The program function enables you to store your
favorite files from any disc or USB device.
A program can contain 20 tracks/files for each
media. (CD, USB1,USB2) Possible to save a total of
60 tracks/files.
Making Programmed list
It is supported only on stop status.
1. Press PROGRAM/MEMORY on the remote
control.
2. Press C/V on the remote control to select
a track/file.
3
3. Press PROGRAM/MEMORY on the remote
control to save and select a next track/file.
4. Repeat steps 2 - 3 to store other tracks/files.
(You can modify the list by pressing
PRESET.FOLDER W/S on the remote control
to select the program number.)
5. Press PROGRAM/MEMORY on the remote
control once again.
To play the programmed list, press d/M after you
make the list.
,
Note
When making or modifying the programmed
list, REPEAT mode is off.
OM7550-FB.DUSALLK_FULL BOOK_ENG_MFL69001813.indd 34
Deleting Programmed list
Deleting function only works in the edit mode.
1. Press PROGRAM/MEMORY on the remote
control in stop status.
2. Select a song by pressing PROGRAM/MEMORY
or PRESET.FOLDER W/S on the remote
control repeatedly.
3. Press DELETE while a song is selected.
,
Note
y Program is switched off in the case below.
- Changing to a different function.
- Turning off and on the unit.
- Operating the numeric buttons on the
remote control.
y Programmed list is cleared in the case
below.
- Removing the disc or the USB device.
- Deleting or recording music files in the
USB device.
- Unplugging the Power Cord.
2015-08-31 4:05:40