Bosch 1200 Series Quick Installation Manual page 7

1200/1400 Series as standard iSCSI disk array
2.
3.
4.
Bosch Sicherheitssysteme GmbH
When the system has started up, press Ctrl+Alt+Del, then type the default password
WSS4Bosch once the disk array login window is displayed.
On first login the desktop default settings are applied. This will take a few seconds and
the system will reboot. After system reboot, log on again and the Bosch VRM Appliance
initial configuration window will be shown. Use this program to configure the disk
array's IP Address.
The top level view of Bosch VRM Appliance initial configuration displays an overview of
the system's configuration and settings. Select the link Configure networking to get
access to the network configuration.
For each network port a separate icon is shown. Select the Local Area Connection icon
that shows the status network, then double-click the icon.
Quick Installation Guide
Setting the IP Address | en
- | V1 | 2011.02
7