Table of Contents
Advertisement
20
5. MENU SCREENS
The menu structure on the RPX4600 is configurable using the PS. In most cases, your
system administrator will set up the order and presence of the menu options to your specific
requirements.
This section describes all the menus that are currently available. It also describes the Channel
Screen which is the main default screen that is displayed after the radio is switched on.
Normally, the menus are divided into two menu lists - the Main Menu list and the Setup Menu
list.
In the default configuration, the Main Menu contains the Channel, Zone and Setup menus. This
allows access to the second 'Setup' menu level.
The Main Menu can be accessed from the default screen by selecting the 'M' (F1) button.
To access any of the menu options from the Main, Setup or User Options Menus, use the
keys to scroll through the menu options and then press the 'OK' button when the required
menu is displayed.
Pressing the 'Back' key at any point will go back to the previous screen.
5.1. CHANNEL SCREEN
The Channel Screen shows the current channel and allows channel selection.Pressing the 'M' key
enters the Menu mode.
Note.
When an Analog FM channel is selected and in Monitor mode, all unencrypted digital
P25 traffic will be heard regardless of NAC or Talk Group.
RPX4500/RPX4600 P25 PORTABLE RADIO – USER MANUAL
Special Ops
Zone 4
Copyright © 2015 RCA Communications Systems
Radio channels may be configured
with the PS as specific frequencies
or as auto-scan types. When an
auto-scan channel is selected, it will
immediately go into scan mode.
Selecting another non-auto-scan
channel will stop the scan.
If a radio channel is defined as a P25
Conventional Digital Channel, it will
only receive P25 digital signals.
If a radio channel is defined as an
Analog FM channel, it will receive both
P25 Digital and Analog FM signals.
and
Advertisement
Table of Contents
