Timer Review - Changing And Erasing Record Settings - Sanyo VHR-VK920A Instruction Manual

Timer review - changing and erasing record settings

TIMER PROGRAM
PR START END DATE
01 18:10 20:30 12/05
1
03 21:20 22:20 13/05
PR+/-:SELECT
OK:CONFIRM
TIMER PROGRAM
2
PR START END DATE
01 18:10 20:30 12/05
03 21:20 22:20 13/05
PR+/-:SELECT
OK:CONFIRM
PR
START TIME
END TIME
START DATE
TAPE SPEED
PR+/-:SELECT (AV)
3a
OK:CONFIRM
Changing a setting
Select the details you want to change by pressing
Use the number buttons 0 to 9 to change the settings. Use
PR+ to select the AV channel, to change the tape speed.
When you have made all the changes, press
until you see 'OK : confirm' on the bottom line of the screen.
Press OK.
Remember to load a cassette and switch the video off by
pressing .
Press MENU.
Choose "Timer Program" then press OK.
MENU:END
Select the program you want to change or erase by
pressing PR+ or PR-.
Press OK to confirm.
MENU:END
TIMER PROGRAM (ONCE)
01
18:10
20:30
12/05(FRI)
LP
0-9 : SETUP (PR)
/ :CORRECT
MENU:END
PR
START TIME
END TIME
START DATE
TAPE SPEED
3b
0 :ERASE
Erasing a setting
or . Press the number 0.
Press OK to confirm.
Press MENU twice to end.
or
TIMER PROGRAM (ONCE)
03
21:20
22:20
13/05(SAT)
SP
/ :CORRECT MENU:END
21