Table of Contents
Advertisement
se-
type of measure-
quence
ment/adjustment
4
checking the jack socket, the USB socket and the file transfer between PC and DRM 85 microphone
4.1
jack socket
4.2
USB socket
4.3
checking the file
transfer
30/41
signal input
device settings
see 2.1;
see 2.1
Ω
insert an 32
headphone and speak
into the microphone
capsule
put the provided USB
The DRM 85 switches on for
cable into the DRM 85
data transmission
USB socket and into a
free PC USB port.
see 2.1;
1. for hearing your own noise during recording insert an 32 Ω headphone in the DRM 85 jack socket.
2. press the DRM 85 "REC" button.
3. speak into the microphone (your own noise is audible via your connected headphone)
4. press the DRM 85 "STOP" button.
5. put the provided USB cable into the DRM 85 USB socket and into one free PC USB port
(the operation system of your PC will be identify the USB device automatically).
6. put the audio file via drag & drop from the DRM 85 into your PC file system.
7. Listen to the audio file with any audio tool (e.g. winamp or other media players):
A clear noise without any distortion must be audible.
measuring
required
point/ test
value
point
–
a clear noise without any
distortion must be audible via
headphone
–
the operation system of your PC
will be identify the USB device
automatically.
the display of the device shows
"USB"
DRM 85-C, DRM 85
remarks
08/2007
Advertisement
Table of Contents
