Advertisement
1. Press the
2. Press the
day(s) remaining.
3. Press the
4. Press the
icon will be displayed.
5. If no key is pressed for longer than 8 seconds, the display will switch back
to show the next feeding time with the timer icon flashing.
1. Press the
The time and clock icon will now be displayed.
2. Press and hold the
3. Press the
4. Press the
5. Press the
Note:
6. Press the
7. Press the
8. (1 07) will be flashing and you must now set the feeding times.
1. Press the TIMER key to display the feeding-time.
2. Press and hold the SET key for two seconds until digits-3 & 4 start
flashing. The display will show the 1
7am.
3. Press the
the top left corner stands for PM when using 12 hour time.
4. Press the
time.
5. Repeat step 3 to set the desired hour for the SECOND feeding time.
6. At this point, if you only want 2 feed times per day, press the
and you are finished.
key to cycle through and view the feeding times.
key once to view the volume/portion-size and feeding
key to display the feeding day(s) remaining.
key once to display the current clock time. The CLOCK
key to display the clock.
key for 2 seconds until all digits blink.
key to set the HOUR.
key to set the MINUTE.
key once to confirm the time.
key to change between 12 or 24-hour display mode.
key to CONFIRM the clock setup.
key to set the desired hour for feeding. Note the (
key to confirm your setting and proceed to the 2
st
feeding time (1 07) = 1
st
feeding at
) in
nd
feeding
key
2
Advertisement
