LG PF1000U Owner's Manual page 5

Power
WARNING
• The appliance coupler is used
as the disconnect device.
- Please make sure the device
is installed near the wall
outlet to which it is connected
and that the outlet is easily
accessible.
• The grounding wire should be
connected.
- Ensure that you connect the
grounding cable to avoid
electric shock. If it is not
possible to ground the unit,
have a qualified electrician
install a separate circuit
breaker.
Do not try to ground the
projector by connecting it to
telephone wires, lightning
rods, or gas pipes.
• The power plug should be
inserted fully into the power
outlet.
- An unstable connection may
cause a fire.
• Do not place heavy objects on
the power cord.
- This may result in fire or
electric shock.
•
Never touch the power plug with
wet hands.
- This may result in electric
shock.
• Do not plug too many devices
into one multi-power outlet.
- This may result in fire due to
the power outlet overheating.
SAFETY PRECAUTIONS
• Keep the AC adapter, power
plug, and the used power outlet
clean from dust or foreign
materials building up.
- This may result in fire.
• If there is any smoke or a
burning smell from the projector
or AC adapter, stop using the
product immediately. Disconnect
the power cord from the power
outlet, and then contact the
customer service centre.
- This may result in fire.
CAUTION
• Always grab the plug to remove
the AC adapter or power cord.
- Otherwise, this may result
in a fire or may damage the
product.
• Hold the plug firmly when
unplugging.
- A damaged wire may create
a fire hazard.
•
Refrain from constantly bending
the power cord of the AC
adapter.
- If the power cord is bent
excessively for a long period
of time, the cord may break
inside. This may result in a
fire or electric shock.
• Ensure the power cord and plug
are not damaged, modified,
severely bent, twisted, pulled,
sandwiched, or hot. Do not use
the product if the power outlet
is loose.
- This may result in fire or
electric shock.
5