Electrical Connection - Miele DA 7000 D Operating And Installation Instructions

Mains connection
,
All electrical work should be
undertaken by a suitably qualified
and competent person in strict
accordance with current national
and local safety regulations.
Installation, repairs and other work
by unqualified persons could be
dangerous. The manufacturer
cannot be held liable for
unauthorised work.
Ensure power is not supplied to the
appliance until after installation or
repair work has been carried out.
Do not connect the appliance to the
mains electricity supply by an
extension lead. These do not
guarantee the required safety of the
appliance.
The rangehood must be connected to a
mains connection which complies with
current local and national safety
regulations.
For extra safety, it is advisable to install
a residual current device (RCD) with a
trip current of 30 mA. Contact a qualified
electrician for advice.
If the switch is not accessible after
installation, an additional means of
disconnection must be provided for all
poles.
The necessary connection data is given
on the data plate. This is visible when
the grease filters have been removed.

Electrical connection

Ensure that this data matches the
household mains supply.
The wires in the mains lead are
coloured in accordance with the
following code:
Green/yellow = earth -
Blue = neutral (N)
Brown = live (L1)
27