Selecting Call Alert Type - Motorola StarTAC Owner's Manual

Getting to Tone Controls...
ƒ
1.
Press
2.
Press
or
3.
Press or
select.

Selecting Call Alert Type

Using this feature, you can choose to be alerted to
incoming calls using the vibrating ringer, the ringer,
both, or neither. Ring Only is the default.
In particular, the VibraCall™ Alert vibrating alert is
ideal for situations where ringing may not be
appropriate, or in noisy places where you might not
hear the ringer.
When both the ringer and vibrating alerts are
selected, the phone alerts you by vibrating for three
cycles and then ringing.
Notes:
• Although you set your call alert type below,
the selection is temporarily suppressed if
Pager Mode is enabled. See "Activating
Pager Mode" on page 87 for details.
• When your phone is connected to an external
power supply and you receive an incoming
call, your phone will ring, regardless of the
call alert setting.
1. Follow the steps in the "Getting to Tone
Controls..." block above to select Call Alert
Type.The display shows your current alert
type setting.
, then press to enter the menu system.
to scroll to Tone Control and press
to scroll to the following features, and press
to select.
to
Shortcut:
ƒ †
Press
to toggle the
VibraCall™
Alert function
on and off.
71