Using The Desktop Charger - Motorola StarTAC Owner's Manual

Tip:
If both a main
and auxiliary
battery are
attached, the
main battery is
charged to
90% before the
auxiliary is
charged.
22
2. Plug the power adapter into a 110V AC
electrical outlet.
or
Plug the vehicle power adapter into the
power adapter plug in the vehicle.
In both cases, a beep-tone sounds, and the
battery icon flashes.
See "Charge Times" on page 24 for charge times.

Using the Desktop Charger

You can use the desktop charger to charge
batteries while they are attached to your phone, or
you can charge a main battery separately.
To charge:
1. Plug the AC adapter
into the back of the
charger, release tab
facing up.
2. Plug the other end of
the adapter into an
AC wall socket.
3. With battery(ies) attached, place the phone
into the charger's pocket.
Note: When the phone is charging, the battery level
indicator flashes. When the battery is fully charged,
this icon stops flashing. If your phone cannot
charge the battery, this indicator does not appear.
Desktop Charger Indicator Lights
The lights for charging a battery are:
Red The battery is rapid charging.
Flashing
The battery is waiting for its charge.
yellow