Advertisement
Advertisement
Table of Contents
Related Manuals for SunTech STP225S-16/Tem
Summary of Contents for SunTech STP225S-16/Tem
- Page 2 General installation Grounding Global Installation Guide for 14 Maintenance Suntech Power Photovoltaic Module Version 20150101 Please read carefully. This document is binding for any warranty case. Any installed PV system less than 500m from coastline, please refer to the Near- coast installation manual.
-
Page 3: Purpose Of This Guide
• This guide contains information regarding the installation and safe handling of electric systems. Wuxi Suntech Power Co., Ltd photovoltaic module (hereafter referred to as “module”). • Do not use mirrors, other magnifiers or antifically concentrated sunlight onto the Wuxi Suntech Power Co., Ltd referred to as “Suntech”. -
Page 4: Product Identification
Use components such as ground fault circuit breakers and fuses as required by Sorting label local authority. Do not remove any labels. Removing a label will make the Suntech warranty void. • Do not use modules near equipment or in places where flammable gases may be generated. -
Page 5: Mechanical Installation
Mounting structure • For ground mounting systems, the minimum distance Suntech recommend from the ground to the bottom of the module is at least 24 inches (60cm). M8 Bolt •... - Page 6 If you Use four mounting holes (Exclude Ve) integrate our obsolete products and need advice, please contact Suntech Global Customer Support Department for installation instructions based on older manuals. Module Dimension Suntech Module Type Length×Width×Thickness...
-
Page 7: Electrical Installation
• Based on the maximum series fuse rating of module and local electrical installation code, always make sure Suntech PV modules with more than two strings in parallel for connection are assembled with the appropriate string fuse for circuit protection. - Page 8 H4, Multi Contact MC4. Suntech strongly recommends using the genuine connector 1) Use WEEB-DPF to bond solar modules to module mounting brackets (grounding type specified by Suntech's product data sheet. Any choice of a different connector part is tested to UL467) type other than specified may void the warranty of the module.
-
Page 9: Maintenance
8.12 29.1 8.92 1000/600 To ensure optimum module performance, Suntech recommends the following maintenance measures: • Clean the module minimum once a year or more often when required depending of the pollution. Remove all organic from the surface. Module with soiling or contamination may reduce the power generation of the system. - Page 10 V series - 1956 mm×992 mm×40 mm W series - 1640 mm×992 mm×35 mm Optimum Optimum Open Short Maximum Maximum Optimum Optimum Open Short Maximum Maximum Maximum Maximum Operating Operating Circuit Circuit Power System Operating Operating Circuit Circuit Power Series System Series Module...
Need help?
Do you have a question about the STP225S-16/Tem and is the answer not in the manual?
Questions and answers