In Use; No Service - Motorola MicroTAC SC-725 Owner's Manual

Reading the Indicators

In Use (4)

Appears when a call is in progress.
Roam (5)
Lights up when your phone accesses a cellular service outside of
your home system. When you leave your cellular service area,
your phone roams (seeks another cellular system).

No Service (6)

Appears when calls cannot be placed or received from
your location.
Caller ID/Message (7)
Appears when you receive a Caller ID* or alphanumeric message. It
will disappear after you've viewed the Caller ID or read the message.
Voice Mail (8)
Indicates that you've received a Voice Mail* message in your Voice
Mailbox. It will disappear after you've listened to the message.
Digital (9)
Indicates you're on a digital channel, allowing for better voice
quality. Check with your Service Provider for more information.
Analog (9)
Appears when you're on an analog channel.
The following indicators appear in the idle display when you
select one of the VibraCall
VibraCall On– Indicates that your phone's ringer is turned
OFF and the VibraCall alert is ON.
Silent Mode – Indicates that all of your phone's tones are
silenced and the VibraCall alert is ON.
Vibrate Then Ring– Indicates that both your phone's
ringer and VibraCall alert are ON.
*Contact your Service Provider for availability.
™
alert combinations (see page 73):
27